DJIVE / LED Control / FAQ

DJIVE LED Control

LED Control questions

What the program is, what you can put on the lights, and how to connect the booth. The same addresses are in Setup inside the program.

What is DJIVE LED Control?

A Windows program for the lights on a DJ booth. You make a playlist of messages, countdowns, games, and colour looks. The screen shows the booth, and the real panels follow when Live is on. DJIVE Video Wall is a different program: that one is the TV, the guest phones, and the shoutouts. LED Control does not need VirtualDJ.

What can I use it for?

A wedding welcome, a first dance, a birthday message, a New Year countdown, a thank you, or a colour look while the music is playing. Ready-made lines cover weddings, birthdays, parties, events, and the season. You can also type your own. The two front panels can run a countdown or a small game on their own. Guests do not join those games from a phone.

What does it control?

Four light panels: left, front left, front right, and right. They connect to an H807SA controller, version 63, at 192.168.6.18. Each panel is 6 columns by 12 rows, 72 squares. Every lamp in a square shows the same colour, and the controller counts that square as one pixel. 288 squares in total. Red, green, and blue, so each panel uses 216 channels. One universe per panel.

Which controller menu values does it expect?

DMX address 1. Pixel channel 3. DMX IC type H801DMX. Light channel 3. IP 18. Net2 input Net2 to Net1. Port put mode 245. Start univ 1. Universes per port 1. Slave 1. Universes per port must stay at 1. Each panel is 72 pixels, one for each square.

What address does the computer use?

On the Ethernet adapter the booth cable is plugged into: IP 192.168.6.5, subnet 255.255.255.0, gateway left blank. Leave Wi-Fi as it is. The controller stays 192.168.6.18.

Windows on a Mac will not save the IP

Windows Settings on a Mac will not save the address when the gateway or DNS is empty. Use IP 192.168.6.5, subnet prefix 24, gateway 192.168.6.1 and DNS 8.8.8.8. Nothing has to be at that gateway. The adapter must say Connected. Control Panel, then the adapter, then IPv4, can keep the gateway blank instead.

How are the universes numbered?

With Start universe set to 1, panel 1 is universe 1, panel 2 is universe 2, panel 3 is universe 3, and panel 4 is universe 4. On the wire those are Art-Net universes 0, 1, 2 and 3, because the controller menu counts from 1.

Does it need VirtualDJ or Node?

No. It is its own Windows program. The setup installs it for this Windows user. It does not install Node, and the computer does not need Node already.

How do updates work?

The program checks DJive.co.uk when it opens. If a newer version is there, the button says Update now. That opens an update window, closes this program, downloads only the files that changed, opens the new version, and then the update window closes.

Where do I download it?

On the Download page. Run the setup. Windows may warn because the installer is not signed. After it is installed, the program can take a newer update without downloading the setup again.